Fire suppression in vehicles

Easy to install

Fogmaker suppression system is normally installed in less than one working day. The installation is carried out by our own travelling service technicians or by one of our many certified installers available all over the world.

Re-setting a released Fogmaker Fire suppression system is often simpler, faster and much cheaper compared to powder or foam suppression systems.

Quick Service

Once a year the fire suppression system should be inspected and the functions tested by a certified service technician. Normally, this does not take more than one hour.

Every five years the suppression system should undergo a complete service, where the suppression fluid is also replaced.

Efficient suppression

Fogmaker high pressure water mist is efficient for suppressing fires in engine compartments. The water mist gives an immediate choking and cooling effect.

The water mist’s ability to quickly suppress the fire limits or stops the damage in the engine compartment. The system works without electricity supply and is position independent (if the vehicle is laying on the side or up-side-down).

Fire suppression in buses

The engine compartment in a bus is narrow and hot, with many potential hotbeds. A hot engine shares a limited space with hydraulics and fuel tubes, electric installations, compressors, heaters and much more that can constitute fire hazards.
The course of event of a fire in an engine compartment is often fast and difficult to suppress with only a hand extinguisher.

We delivers directly to the largest European bus manufacturers as well as performs retrofit installations.
We offer retro-fit installations in all types of buses.

Our high pressure water mist suppression system complies with SBF128 and SPCR183 see links below:

Brandskyddsföreningen SBF128
SPCR-183 “P-mark”

Fire suppression in Forestry machines

The combination of wood chips, chippings and bark that whirl around, hydraulic oil, fuel and high temperatures constitute a high fire risk area in the engine compartment of a forest machine.

As the forest machines often work in distant areas, the fire’s course of event is highly dependent on the machine and the operator’s fire suppression capacity. The consequence of an engine fire in a forest machine is at best a production stop. In worst case the whole forest burns down.

Fire suppression in Mining machines

A fire in a mine can have vast consequences in the form of human lives or longer production reductions with economic losses.

In the compact and hot engine compartment of a mine machine the course of fire can be very fast with massive smoke development in the whole mine complex.

Fire suppression in Trucks

The engine compartment in a truck is narrow and hot, with many potential hotbeds.
A hot engine shares a limited space with hydraulics and fuel tubes, electric installations, compressors, heaters and much more that can constitute fire hazards.
The course of event of a fire in an engine compartment is often fast and difficult to suppress with only a hand extinguisher.

truck

Fire suppression in Contractor machinery

Wheel loaders, excavators, trucks and other machinery are often used under very demanding circumstances. Hard working machines with narrow and hot engine compartments filled with hydraulic tubes, fuel tubes and electric installations are potential fire hazards.

The fire’s course of event can be very fast and it can be very difficult to suppress with a hand fire extinguisher. The consequences of a fire can be very extensive if the machine is working in flammable environments such as lumber mills and dumps.

Fire suppression in Specialized vehicles

Ambulances, military and police vehicles, handicap vehicles, fire engines…
A list of specialized vehicles that work in the most shifting environments and conditions can be made long.
The value of the vehicle is often very high and the consequences of a fire can be enormous.

Hard working, vulnerable vehicles with often narrow and hot engine compartment filled with hydraulic tubes, fuel tubes and electric installations are potential fire hazards.
The fire’s course of event can be very fast and it can be very difficult to suppress with only a hand extinguisher.

Fire suppression in Marine applications

Fogmaker fire suppression system is approved by the Swedish maritime administration, for installation in engine compartments in leisure boats with a gross volume of up to 5 cubic meters.

For larger ships Fogmaker is approved by Bureau Veritas for machines and motor compartments up to 96 cubic meters.

bureau-veritas-logo

bolmsofarjan

 

 

 

 

The Bolmsö ferry chose Fogmaker fire suppression system.
We offer retro-fit installations in all types of boats and ships.

Fire suppression in Racing

emrik

Fire suppression in other installation areas

Fogmaker has installed fire suppression systems in other areas except vehicles. Spare power generators in hospitals is one example.

Fogmaker high pressure water mist is very efficient for extinguishing fires in multiple areas.

The water mist gives an immediate choking and quickly cooling effect. Unique for the water mist is the fact that it fills the entire fire-protected area and access fire beds outside the direct spreading area of the nozzles.

The total life span cost of Fogmaker suppression systems is low compared with competing systems.

Our system is very reliable and adapted for demanding environments. A large service network guarantees fast actions.

Get in touch

Don’t hesitate to contact us if you would like to hear more about our products. Our sales department are happy to answer all your questions.

Contact us